Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
3
.
Quick start
5
lights up.
15
Waveform
Selection Area
Including: sine , square , ramp , pulse
, noise , arbitrary wave , harmonic waves
. When one waveform is selected, the corresponding
backlight will be lit.
16
USB Interface
Connect to an external USB Host device, such as a USB flash
drive.
17
Power Button
Turn on/off the waveform generator
Rear Panel
Figure 3- 2 Rear Panel Overview
1
Retractable Handle
2
Vents
3
Power Input Socket
AC power input interface.
4
Fuse Box
The place to install the fuse.
5
Stool
Tilting the signal generator for easy operation.
6
LAN Interface
The signal generator is connected to the local area
network through this interface for remote control.