Instructions

4.Panel Operation
57
Edit the Arbitrary Wave (Edit)
Press the front panel Edit function key to enter the arbitrary wave editing
interface.
(1) Set the number of waveform points: Press the number of waveform
points softkey, use the knob to change the value directly or use the
numeric keypad to input and select the unit softkey. The number of points
ranges from 2 to 100,000.
(2) Set interpolation: Press the Interpolate softkey to toggle the interpolation
on/off. Select On to connect each waveform point with a straight line;
select Off, the voltage level between each waveform point remains the
same, creating a waveform similar to the step.
Accessibility Factory Setting
Backlight
100%
Screen saver
turn on
Screen saver time
30Minute
Separator
Space
CH1 synchronization
shut down
CH2 synchronization
shut down
CH1 load
50ohm
CH2 load
50ohm
USB device
USBTMC
IP address
192.168.1.99
Gateway
192.168.1.1
Subnet mask
255.255.255.000
Port
3000
Language
Subject to the actual machine
Buzzer
turn on
Clock source
internal
Between Channels Factory Setting
Frequency lock
Off
Amplitude lock
Off