Instructions

3.Quick start
4
power-on parameters; save or read the settings file.
Utility: Set the auxiliary system function
Store: Save/recall arbitrary waveform data
Help: To get context help for any front panel button or menu
softkey, press the button and then press the button for which
you need help.
7
Numerical Keypad
Input the parameter
8
CH2 Button Area
CH2 key: Enter the waveform interface and select the CH2
channel (the backlight of the button lights up). After
selecting, the waveform and parameters of CH2 can be set.
Blue Trigger button: CH2 manual trigger button. In sweep or
burst mode, when the trigger source is selected as “Manual”,
each press of this button will initiate a trigger.
On/Off key: Turns the output of the CH2 channel on or off.
When the output is turned on, the backlight of the button
lights up.
9
CH2 Sync Output
Terminal
When Utility → CH1/2 Set → CH2 Sync
turned on, this
terminal outputs a sync signal that matches the current
configuration of CH2.
10
CH2 Output
Termnial
Output CH2 signal
11
CH1⇌CH2 Button
Display channel copy menu and menu of frequency
synchronization, amplitude syn
chronization, phase
alignment, etc.
12
CH1 Output
Terminal
Output CH1 signal
13
CH1 Sync Output
Terminal
When Utility → CH1/2 Set → CH1 Sync
turned on, this
terminal outputs a sync signal that matches
the current
configuration of CH1.
14
CH1 Button Area
CH1 key: Enter the waveform interface and select the CH1
channel (the backlight of the button lights up). After
selecting, the waveform and parameters of CH1 can be set.
Yellow Trigger button: CH1 manual trigger button. In sweep
or burst mode, when the
trigger source is selected as
“Manual”, each press of this button will initiate a trigger.
On/Off key: Turns the output of the CH1 channel on or off.
When the output is turned on, the backlight of the button