Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1274960
Material Safety Data Sheet
8. Exposure Controls/Personal Protection
Engineering Controls
Use adequate ventilation to keep airborne concentrations low. If used under conditions that generate particulates, the ACGIH
TLV-TWA of 3mg/m3 respirable fraction (10mg/m3 total) should be observed.
Personal Protective Equipment
Eye and Face Protection: None required for consumer use. If there is a Hazardof contact: Tight sealing safety goggles. Face
protection shield.
Skin and Body Protection: None required for consumer use. If there is a Hazard of contact: Wear protective gloves and
protective clothing.
Respiratory Protection: No protective equipment is needed under normal use conditions. If exposure limits are exceeded or
irritation is experienced, ventilation and evacuation may be required.
9. Physical and Chemical Properties
Physical State
Appearance: Cylindrical
Color: Blue
Odour: If leaking, smells of medical ether.
Change in condition
pH: Not applicable as supplied.
Flash Point: Not applicable unless individual components exposed.
Flammability: Not applicable unless individual components exposed.
Relative density: Not applicable unless individual components exposed.
Solubility (water): Not applicable unless individual components exposed.
Solubility (other): Not applicable unless individual components exposed.
10. Stability and Reactivity
Chemical Stability
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Conditions to Avoid
Exposure to air or moisture over prolonged periods.
Incompatible materials
Acids, Oxidizing agents, Bases.
Hazardous Decomposition Products
Carbon oxides.
Page 4 of 7