User manual

26
Press
twice:
• ▲T1·T2 button
Press once:
- Switch the real-time reading from T1 to T2.
- Shows the minimum reading (MIN) of the current measurement process of T2.
Press twice:
- Shows the current readings’ difference (T1 - T2) on top.
- Shows the minimum difference underneath.
- Point in time, at which the minimum difference is measured, is displayed at
lower edge of the display in minutes and seconds (min:sec) or in hours and
minutes (hour:min).
Press three times:
- Switch back to real-time and minimum reading of T1.
Press
three
times:
• The real-time reading of T1 appears on top.
• The average value (AVG) of the current measurement process of T1 appears
underneath.
• The running total time of the current measurement process is displayed at lower edge
of the display in minutes and seconds (min:sec) or in hours and minutes (hour:min).
• ▲T1·T2 button
Press once:
- Switch the real-time reading from T1 to T2.
- Shows the average reading (AVG) of the current measurement process of T2.
Press twice:
- Shows the current readings’ difference (T1 - T2) on top.
- Shows the average difference underneath.
- The point in time, at which the average difference is measured, is displayed
at lower edge of the display in minutes and seconds (min:sec) or in hours and
minutes (hour:min).
Press three times:
- Switch back to real-time and average reading of T1.
Press and hold the MAX/MIN button for approx. two seconds to return to normal display mode.