Command line format COMMAND...
Command code & return value Function Example Input command: GMAX[CR] Get PS maximum Voltage & Current value Input command: GMAX[CR] =??? =??? Return value: 180200[CR] OK[CR] Return value: [CR] OK[CR] Meaning: Maximum Voltage is 18.0V Maximum Current is 2.
Input command: GETS[CR] Return value: [CR] OK[CR] Get PS preset Voltage & Current value Input command: GETS[CR] =??? =??? Return value: 150180[CR] OK[CR] Meaning: The Voltage value set at 15V and Current value set at 1.
Input command: Save Voltage and Current value into 3 PS memory PROM[CR] =??? =??? (X is memory location number start from 0 to 2) Return value: OK[CR] Input command: GETM[CR] Return value: [CR] [CR] [CR] OK[CR] Get saved Voltage and Current value from 3 PS memory locations =??? =??? (X is memory location number start from 0 to 2) Inp
Input command: GOVP[CR] Get preset upper limit of Input command: output Voltage GOVP[CR] Return value: [CR] OK[CR] =??? Return value: 111[CR] OK[CR] Meaning: The preset upper limit of output Voltage is 11.1V Input command: SOVP[CR] Preset upper limit of output Voltage Input command: SOVP151[CR] Return value: OK[CR] =010
