Datasheet

Input command:
PROM<voltage0><current0><voltag
e1><current1><voltage2><current
2>[CR]
Return value:
OK[CR]
Save Voltage and Current
value into 3 PS memory
locations
<voltage
X >=???
<current X >=???
( X is memory location
number start from 0 to 2)
Input command:
PROM111110022120033130[CR]
Return value:
OK[CR]
Meaning:
Preset Memory 0 as 11.1V and 1.1A
Preset Memory 1 as 2.2V and 1.2A
Preset Memory 2 as 3.3V and 1.3A
Input command:
GETM[CR]
Return value:
<voltage0><current0>[CR]
<voltage1><current1>[CR]
<voltage2><current2>[CR]
OK[CR]
Get saved Voltage and
Current value from 3 PS
memory locations
<voltage X >=???
<current X >=???
( X is memory location
number start from 0 to 2)
Input command:
GETM[CR]
Return value:
111111[CR]
122120[CR]
133130[CR]
OK[CR]
Meaning:
PS return following preset
value from 3 memory locations;
Memory 0 is 11.1V and 11.1A
Memory 1 is 12.2V and 1.2A
Memory 2 is 13.3V and 1.3A
Input command:
RUNM<memory>[CR]
Return value:
OK[CR]
Set Voltage and Current
using values saved in
memory locations
<memory>=0/1/2
Input command:
RUNM1[CR]
Return value:
OK[CR]
Meaning:
Set Voltage and Current using
values saved in memory location
1