User manual

51
Internal preset memory
You can read, set and apply the preset memory of the power supply via the software.
• The preset values are loaded into the software automatically, but if not, press the “Read Fro PS”
button to load the information.
• If you want to use either of the preset values, select the corresponding option. Then press the
button “Set”.
• If you want to set the preset values, key the values into the elds on the right-hand side. Then
press the button “Set”.
• If you want to clear the table, press the button “Clear Table”.
You can save, export, import or delete a saved record and print the setting. The operation is similar
to those in the basic operation.