VOLTCRAFT ® Lineares Labornetzgerät PS-1440 쮕 B E DI E N UNGSANL EITUNG Seite 4 - 13 Linear laboratory network device PS-1440 OPERATING INSTRUCTIONS Page 14 - 23 Alimentation linéaire de laboratoire PS-1440 NOTICE D’EMPLOI Page 24 - 33 Lineaire labovoeding PS-1440 GEBRUIKSAANWIJ ZING Pagina 34 - 43 Best.-Nr. / Item-No. / N° de commande / Bestnr.
VOLTCRAFT IM INTERNET http://www.voltcraft.de 쮕 Impressum Diese Bedienungsanleitung ist eine Publikation von Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel.-Nr. 0180/586 582 7 (www.voltcraft.de). Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z.B. Fotokopie, Mikroverfilmung, oder die Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
쮕 Diese Bedienungsanleitung gehört zu diesem Produkt. Sie enthält wichtige Hinweise zur Inbetriebnahme und Handhabung. Achten Sie hierauf, auch wenn Sie dieses Produkt an Dritte weitergeben. Heben Sie deshalb diese Bedienungsanleitung zum Nachlesen auf! Eine Auflistung der Inhalte finden Sie in dem Inhaltsverzeichnis mit Angabe der entsprechenden Seitenzahlen auf Seite 4. These operating instructions belong with this product.
3
i Einführung Sehr geehrter Kunde, mit diesem Voltcraft®-Produkt haben Sie eine sehr gute Entscheidung getroffen, für die wir Ihnen danken möchten. Sie haben ein überdurchschnittliches Qualitätsprodukt aus einer Marken-Familie erworben, die sich auf dem Gebiet der Mess-, Lade und Netztechnik durch besondere Kompetenz und permanente Innovation auszeichnet. Mit Voltcraft® werden Sie als anspruchsvoller Bastler ebenso wie als professioneller Anwender auch schwierigen Aufgaben gerecht.
Bestimmungsgemäße Verwendung Das lineare Labornetzgerät dient als potentialfreie DC-Spannungsquelle zum Betrieb von Kleinspannungsverbrauchern bis zu einer Betriebsspannung von max. 36 V. Der Anschluss erfolgt über Hochlast-Schraubklemmen mit 4mm Steckbuchsen. Am Ausgang ist die Spannung von 0 - 36 V und die Stromstärke von 0,01 - 40 A stufenlos regelbar: Die Einstellung für Spannung und Strom erfolgt über Grob- und Feinregler um eine schnelle und präzise Werteinstellung zu ermöglichen.
Bedienelemente (Siehe Ausklappseite) (1) Netzschalter zur Inbetriebnahme (I = Ein / 0 = Aus) (2) Betriebsanzeige (3) Flüssigkristall-Anzeige (kurz „Display“, V = Spannung, A = Strom) (4) „COARSE“ Grob-Einstellregler für Spannung (5) „FINE“ Fein-Einstellregler für Spannung (6) „PRESET“-Taster zur Anzeigenumschaltung für die Einstellung der Strombegrenzung (7) „OUTPUT“-Umschalter für die Ein- und Abschaltung des DC-Ausganges (8) „OFF“ Leuchtanzeige für abgeschalteten DC-Ausgang (9) „TEMP.
☞ Das „Hand“-Symbol ist zu finden, wenn Ihnen besondere Tipps und Hinweise zur Bedienung gegeben werden sollen. Nur zur Verwendung in trockenen Innenbereichen Dieses Gerät ist CE-konform und erfüllt die erforderlichen europäischen Richtlinien.
Funktionsbeschreibung Das Labornetzgerät arbeitet mit leistungsstarker und robuster Lineartechnologie. Der Gleichspannungsausgang ist galvanisch getrennt und weist eine Schutztrennung gegenüber der Netzspannung auf. Sekundärseitig erfolgt der DC-Anschluss über zwei farbige Hochleistungs-Schraubklemmbuchsen. Im übersichtlichen Display erfolgt die Spannungs- und Stromanzeige. Über Leuchtanzeigen wird der aktuelle Zustand des Netzgerätes signalisiert. Diverse Schutzmechanismen, z.B.
Anschluss des Netzkabels • Verbinden Sie das beiliegende Schutzkontakt-Netzkabel mit dem Kaltgeräte-Einbaustecker (17) am Netzgerät. Achten Sie auf festen Sitz. • Verbinden Sie das Netzkabel mit einer Schutzkontakt-Steckdose mit Schutzerdung. Ausgangsspannung einstellen • Vergewissern Sie sich, dass der DC-Ausgang abgeschaltet ist (Schalter 7 in Position „OFF“) • Schalten Sie das Netzgerät über den Betriebsschalter (1) ein.
DC-Ausgang ein- und ausschalten Der DC-Ausgang darf nur im unbelasteten Zustand ein- und ausgeschaltet werden. Das Schalten unter Last führt zur Beschädigung des Netzgerätes. ☞ Schalten Sie den DC-Ausgang vor jeder Spannungseinstellung ab. Der DC-Ausgang wird über den Umschalter „OUTPUT“ (7) ein und ausgeschaltet. Dies ermöglicht das arbeiten am DC-Ausgang, ohne das Netzgerät selbst abschalten zu müssen. Der Umschalter verbleibt in der entsprechenden Schalterstellung.
• Der angeschlossene Verbraucher kann jetzt eingeschaltet werden. • Die Stromaufnahme des angeschlossenen Verbrauchers wird in der Stromanzeige „A“ im Display angezeigt. ☞ Kontrollieren Sie regelmäßig den festen Sitz der Schraubklemmvorrichtung, da es bei erhöhten Übergangswiderständen zur Überhitzung der Kontaktstellen kommen kann. Montagebügel für 19“ Rackmontage anbringen Das Labornetzgerät kann als Tischgerät oder über die beiliegenden Montagebügel auch in 19“ Baugruppenträger befestigt werden.
• Drücken Sie den rückseitigen Sicherungsknopf in den Sicherungsautomaten, bis dieser einrastet. • Das Netzgerät kann wieder in Betrieb genommen werden Behebung von Störungen Mit dem Labornetzgerät haben Sie ein Produkt erworben, welches zuverlässig und betriebssicher ist. Dennoch kann es zu Problemen oder Störungen kommen.
Technische Daten Betriebsspannung ....................................................230 V/AC (+/- 10%) 50/60 Hz Ausgangsspannung ..................................................0 - 36 V/DC Ausgangsstrom ........................................................0,01 - 10 A Ausgangsleistung ......................................................max. 1440 VA Regelverhalten bei Laständerung 0~100% ..............Spannung: ±(0,05% + 10 mV) Strom: ±(0,6% + 50 mA) Restwelligkeit ...................................
o Introduction Dear customer, Thank you for making the excellent decision to purchase this Voltcraft® product. You acquired a high-quality product with a name that stands for outstanding products in the field of measuring, charging and power technology, which excel by professional competence and permanent innovation. The products of the Voltcraft® family offer optimum solutions even for the most demanding applications for ambitious hobby electricians as well as for professional users.
Intended use The linear laboratory power supply serves as a potiential-free DC voltage source for the operation of small voltage consumptions up to an operating voltage of a maximum of 36 V. The connection is provided via high-load screw terminals with 4 mm sockets. On the output the voltage can be stagelessly from 0 - 36 V and the current from 0.01 - 40 A: The settings for current and voltage are made via coarse and fine controls in order to allow fast and precise value settings.
Operating elements (see fold-out page) (1) Power unit for putting the device into operation (I=ON / 0=OFF) (2) Power indicator (3) Liquid crystal display (short „display“, V = voltage, A = current) (4) „COARSE“ coarse settings controller for voltage (5) „FINE“ fine settings controller for voltage (6) „PRESET“ key for display switching to set the current limitation (7) „OUTPUT“ switch to switch on and off the DC output (8) „OFF“ light display for switched off DC output (9) „TEMP.
☞ The „hand“ symbol is used to indicate where specific hints and information on handling are given. Only to be used in dry indoor areas. This device is conforms to CE and meet the necessary European regulations. Earth potential Earth wire connection; this screw may not be slackened • Electrical appliances and accessories are not toys and have no place in the hands of children.
Functional description The laboratory power supply works with high-performance and solid linear technology. The DC output is electrically isolated and features a protective isolation towards the mains voltage. The secondary DC connection is effected via two coloured high-peformance terminal screw sockets. The current and voltage display is concise. Via light displays the current condition of the power supply is indicated. Various protective mechansisms, e.g.
Connecting the Power Cable • Connect the supplied earthing mains cable to the low-power device installation socket (17) on the power supply. Make sure it is plugged properly. • Connect the power cable to a shockproof mains socket with protective grounding. Setting output voltage • Ensure that the DC output is switched off (switch 7 in position „OFF“) • Switch on the mains power supply at the power switch (1). The operating display (2) lights up and the current and voltage display appears on the display.
Turning the DC output on and off The DC output may only be switched on and off in unloaded condition. Switching under load results in damage to the power supply. ☞ Switch off the DC output before every voltage settings. The DC output is turned on and off via the „OUTPUT“ (7) key. This allows working on the DC output without having to switch off the power supply itself. The switch remains in the respective position. ON The DC output is active OFF The DC output is not active.
☞ Regularly check that the screw terminal device fits properly, as the contacts can overheat in the event of increased transition resistances. Fitting mount shackle for 19“ rack mounting The laboratory power supply can be used as a desktop appliance or fitted via the supplied mount shackles in 19“ module carriers. Use the screws supplied only to fit the shackles. Wrong or longer screws could touch contact dangrous parts on the inside. Do not apply any additional holes or borings to the housing.
Troubleshooting By purchasing the laboratory power supply unit, you have acquired a product that is reliable and operationally safe. Nevertheless, problems or faults may occur. For this reason we want to describe how to troubleshoot potential malfunctions: Always adhere to the safety instructions! Error Possible cause The power supplt Does the operating display light up on the power supply(2) ? cannot be switched on.
Technical data Operating voltage ......................................................230 V/AC (+/- 10%) 50/60 Hz Output voltage ..........................................................0 -36 V/DC Output current ..........................................................0.01 - 10 A Output power ............................................................max. 1440 VA Response for a load change 0-100% ........................Voltage: ±(0.05% + 10 mV) Current: ±(0.6% + 50 mA) Residual amplitude...............
a Introduction Chère cliente, cher client, Vous avez pris une très bonne décision en achetant ce produit Voltcraft ® et nous vous en remercions. Vous avez acquis un produit de qualité issu d’une marque se distinguant par sa compétence technique, son extraordinaire performance et une innovation permanente dans le domaine de la métrologie et de la technique de charge et de réseau. Voltcraft® permet de répondre aux tâches exigeantes du bricoleur ambitieux ou de l’utilisateur professionnel.
Utilisation conforme L’alimentation linéaire de laboratoire sert comme source de tension CC sans potentiel pour le fonctionnement des consommateurs à faible tension de service jusqu’à 36V maxi. Le raccordement se fait par bornes à vis haute performance et de douilles de 4mm.
Eléments de commande (Voir le volet rabattable) (1) Commutateur principal de mise en service (I = marche / 0 = Arrêt) (2) Indicateur de fonctionnement (3) Afficheur à cristaux liquide (en bref « écran », V = tension, A = courant) (4) « COARSE » Régulateur approximatif de la tension (5) « FINE » Régulateur précis de la tension (6) « PRESET » Touche de commutation entre les affichages pour le réglage de la limitation du courant (7) « OUTPUT » Commutateur pour l’activation et la désactivation de la sortie CC (
☞ Le symbole de la „main“ précède les recommandations et indications d’utilisation particulières. N’utiliser qu’à l’ intérieur dans des locaux sec Cet appareil est homologué CE et répond aux directives européennes requises.
- l’appareil a été stocké durant une période prolongée dans des conditions défavorables, - l’appareil a subi de sévères contraintes liées au transport. • Tenez également compte des consignes de sécurité supplémentaires de chaque chapitre de ce mode d’emploiainsi que des modes d’emploi des appareils connectés. Description du fonctionnement L’alimentation de laboratoire utilise la technologie linéaire puissante et robuste.
Raccordement du cordon secteur • Branchez le cordon secteur de sécurité fourni sur la fiche intégrée (17) du bloc d´alimentation. Veillez à ce que le branchement soit correctement positionné. • Branchez le cordon secteur à une prise de courant de sécurité avec protection mise à la terre. Réglage de la tension de sortie • Assurez-vous que la sortie CC est désactivée (commutateur 7 en position « OFF ») • Mettez en marche le bloc d’alimentation avec l’interrupteur de mise en marche (1).
Mise en marche et arrêt de la sortie CC La sortie CC ne doit être activée ou désactivée qu’en état non chargé. L’activation ou la désactivation en charge entraînent l’endommagement du bloc d’alimentation. La sortie CC s’active et se désactive à l’aide du commutateur « OUTPUT » (7). Cela permet d’effectuer des modifications sur la sortie CC sans devoir mettre hors tension le bloc d’alimentation. Le commutateur reste dans la position correspondante. ON La sortie CC est active.
• Le consommateur connecté peut maintenant être mis en marche. • La consommation de courant du consommateur raccordé s’affiche sur l’indicateur du courant « A » sur l’écran. ☞ Vérifiez régulièrement la bonne fixation du dispositif de bornes à vis car les résistances de contact augmentées peuvent causer une surchauffe des emplacements de contact.
Dépannage Avec cette alimentation de laboratoire, vous avez acquis un produit d’une grande sécurité de fonctionnement. Il est toutefois possible que des problèmes ou des pannes surviennent. A ce niveau, nous souhaitons vous décrire comment vous dépanner le cas échéant : Respectez impérativement les consignes de sécurité ! Problème Cause éventuelle Le bloc d’alimentation ne se laisse plus mettre en marche.
Caractéristiques techniques Tension de service ..........................................................230 V/CA (+/- 10%) 50/60 Hz Tension de sortie..............................................................0 à 36 V/CC Courant de sortie..............................................................0,01 à 10 A Puissance de sortie ..........................................................1440 VA maxi. Régulation en cas de changement de charge 0~100%....
j Inleiding Geachte klant, hartelijk dank voor de aankoop van dit Voltcraft® product. U heeft hiermee een goede keus gedaan. Dit apparaat is een buitengewoon kwaliteitsproduct van een merkenfamilie die gekenmerkt wordt door deskundigheid en permanente innovaties op het vlak van meettechniek, laadtechniek en voedingsapparatuur. Met Voltcraft® kan zowel de ambitieuze hobbyelektronicus als de professionele gebruiker ingewikkelde taken uitvoeren.
Beoogd gebruik De lineaire labovoeding dient als potentiaalvrije DC-spanningsbron voor het gebruik van laagspanningsapparaten tot een voedingsspanning van max. 36 V. Het aansluiten gebeurt via hoge belastings-schroefklemmen met 4mm stekkerbussen. Op de uitgang is de spanning traploos regelbaar van 0 - 36 V en de stroom van 0,01 - 40 A: De instelling van spanning en stroom gebeuren met grof- en fijnregelaars, zodat een snelle en nauwkeurige instelling vand e waarde mogelijk is.
Bedieningselementen (zie uitklappagina) (1) Netschakelaar voor inbedrijfname (I = IN / O = UIT) (2) Bedrijfsdisplay (3) LCD-display (kortweg „Display“, V = spanning, A = stroom) (4) „COARSE“ grove instelling van de spanning (5) „FINE“ fijnregeling van de spanning (6) „PRESET“-toets voor het omschakelen van het LCD voor het instellen van de stroombegrenzing (7) „OUTPUT“-omschakelaar voor het in- en utischakelen van de DC-uitgang (8) „OFF“ indicatie voor uitgeschakelde DC-uitgang (9) „TEMP.
☞ Het „Hand“-symbool vindt u bij bijzondere tips of instructies voor de bediening. Alleen voor toepassing in droge binnenruimtes Dit apparaat is CE-goedgekeurd en voldoet aan de desbetreffende Europese richtlijnen.
Beschrijving van de werking De labovoeding werkt met een krachtige en robuuste lineaire technologie. De gelijkspanningsuitgang is galvanisch gescheiden en is voorzien van een veiligheidsscheiding ten opzichte van de netspanning. De secundaire DC-aansluiting gebeurt via twee gekleurde schroefklemmen. Spanning en stroom worden weergegeven op een overzichtelijk display. De actuele toestand van de voeding wordt aangegeven via LED’s.
Aansluiting van het netsnoer • Verbind het meegeleverde netsnoer met randaarde met de netaansluiting (17) van de voeding. Zorg de de plug vast zit. • Verbind het netsnoer met een goedgekeurd stopcontact met randaarde. Uitgangsspanning instellen • Controleer of de DC-uitgang uitgeschakeld is (schakelaar 7 in de stand „OFF“) • Schakel de voeding in via de aan/uit-schakelaar (1). De bedrijfsindicatie (2) licht op en op het display worden spanning en stroom weergegeven.
DC-uitgang in- en utischakelen De DC-uitgang mag alleen in onbelaste toestand worden in- en uitgeschakeld. Het schakelen onder belasting leidt tot schade aan de voeding. De DC-uitgang wordt met de schakelaar „OUTPUT“ (7) in- en uitgeschakeld. Dit maakt het werken aan de DC-uitgang mogelijk, zonder dat u de voeding zelf moet uitschakelen. De schakelaar blijft in de betrokken stand. ON De DC-uitgang is actief OFF De DC-uitgang is niet actief.
• De stroomopname van de aangesloten verbruiker wordt zichtbaar op de stroomindicatie „A“ op het display. ☞ Controleer regelmatig of de schroefklemmen vast zitten: hogere overgangsweerstanden kunnen leiden tot oververhitten van de contactpunten. Montagebeugels voor 19“ rackmontage aanbrengen De voeding kan worden gebruikt als tafelapparaat of met behulp van de meegeleverde montagebeugels in een 19“ racdk worden gemonteerd. Gebruik voor de montage van de beugels alleen de meegeleverde schroeven.
• Druk op de beveiligingsknop op de achterzijde in, tot deze vastklikt. • Daarna kan de voeding opnieuw gebruikt worden. Verhelpen van storingen U heeft met deze labovoeding een product aangeschaft dat betrouwbaar en veilig is in het gebruik. Toch kunnen zich problemen of storingen voordoen. Hieronder vindt u enkele manieren om eventuele storingen te verhelpen: Neem altijd de veiligheidsinstructies in acht! Storing Mogelijke oorzaak De voeding laat zich niet inschakelen.
Technische gegevens Bedrijfsspanning........................................................230 V/AC (+/- 10%) 50/60 Hz Uitgangsspanning......................................................0 - 36 V/DC Uitgangsstroom ........................................................0,01 - 10 A Uitgangsvermogen ....................................................max. 1440 VA Regelgedrag bij belastingsverandering 0~100 %......Spanning: ±(0,05% + 10 mV) Stroom: ±(0,6% + 50 mA) Restspanningen ............................
44
45