User manual

22
Intended Use
The digital converters generate a clean sinus alternate voltage of 230 V/AC from 12 or 24 V direct voltage,
depending on model. This enables the connection of many different 230V consumers to 12 or 24V direct
voltage sources, e.g. in cars, boats or solar installation in weekend houses or when camping.
Due to the high peak load, the absolutely clean output voltage and the high degree of efficiency, you can
also operate devices with synchronised power units, converters such as TV and SAT systems, audio
systems, tools with electrical motors, pumps, household appliances, compressors, chargers for mobile
phones or notebooks, etc..
The maximum output of the 230 V consumer is indicated in the technical data (permanent output). Devi-
ces with a higher power consumption than the stated permanent output may not be connected.
When connecting devices with electric drives (e.g. power drills, refrigerators, etc.), please note that these
may require a higher start-up power than indicated on the type plate.
The product is designed for private use rather than commercial purposes.
Operation is only permitted in a dry environment; contact with moisture must be avoided at all times.
The SWD series converter was manufactured pursuant to the latest state of the art. The devices fulfil the
requirements of the applicable European and national directives and may also be used in public traffic in
the area of the StVZO.
Conformity has been established and the relevant statements and documents have been deposited with
the manufacturer. To maintain this status and to ensure safe operation, you as the user must observe
these operating instructions!
Equipment
- StandBy function with reduced idle power intake can be switched on
- Polarity reversal and overvoltage protected input
- Output short-circuit and overload protected
- Automatic switch-off for undervoltage to protect the battery
- Adjustable dynamic deep discharge protection via optional display remote control
- USB charger output 5V/DC 500 mA
- Optional cable or radio remote controls available
- Output data can be read through optional display remote control
Operation under adverse environmental conditions is not permitted.
Unfavourable ambient conditions are:
- Ambient temperatures > 50°C
- Wetness or too high air humidity (> 80% rel. humidity)
- presence of dust or combustible gases, vapours or solvents
- thunderstorms or similar conditions such as strong electrostatic fields etc.
Any use other than that described above will damage the product and may involve other risks, such as
short-circuit, fire, electric shock, etc. Do not change or modify any part of the product!
Always observe the safety instructions!