Operation Manual

Briefly push the „START/ENTER“ button. „ON“ (or „OFF“) then starts to flash in the

bottom display line.

With the buttons „INC“ or „DEC“, you can select between „ON“ (= safety timer activated)

and „OFF“ (safety timer deactivated).

Save the setting by pressing the „START/ENTER“ button.

Now the time for the safety timer starts to flash (bottom line on the right).

With the buttons „INC“ or „DEC“, you can set the time (10....720 min). Keep the

respective button pressed for quick adjustment.

Save the setting by pressing the „START/ENTER“ button.

• With the „INC“ button, you access the next setting (or with the button „DEC“ the previous

setting or return to the main menu with the button „BATT TYPE/STOP“).

Another safety function of the charger can terminate the charge process if a certain

capacity was „loaded“ into the battery.

Briefly push the „START/ENTER“ button. „ON“ (or „OFF“) then starts to flash in the

bottom display line.

With the buttons „INC“ or „DEC“, you can select between „ON“ (= safety cut-off activated)

and „OFF“ (safety cut-off deactivated).

Save the setting by pressing the „START/ENTER“ button.

Now the capacity starts to flash (bottom line on the right).

With the buttons „INC“ or „DEC“, you can select the capacity (10....50000 mAh). Keep

the respective button pressed for quick adjustment.

Save the setting by pressing the „START/ENTER“ button.

• With the „INC“ button, you access the next setting (or with the button „DEC“ the previous

setting or return to the main menu with the button „BATT TYPE/STOP“).

Capacity Cut-OFF

ON 5000mAh

Key Beep OFF

Buzzer OFF