User manual
24
2. INTENDED USE
The environment meter combines 5 meters in one - anemometer · luxmeter · sound level meter · thermometer ·
hygrometer. The meter is used for comparison measurements.
The sensors for light strength, temperature and humidity as well as wind speed are applied with a pluggable connec-
tion cable and can be used away from the meter. Measurements at difcult-to-access measured objects will also be
quick and simple. The measuring microphone for sound level measurements is rmly integrated in the device.
Temperature or humidity measurements can be performed at the same time as sound level measurement, wind
speed measurement or lighting strength measurements.
A MIN/MAX display and data hold function facilitate reading the measured value.
The unit of temperature, wind speed and lighting strength can be switched.
The following measurements are available:
- Sound level 35 to 130 dBA
- Light strength 0 Lux - 200 kLux (0 Fc – 20 kFc)
- Wind speed 0.5 - 30.0 m/s
- Air temperature -40 to +70 °C (-40 to 158 °F)
- Relative humidity 10 - 95% RH
Operation requires a 9 V block battery (type 1604A or same build). Measurement under unfavourable ambient
conditions is not permitted.
Unfavourable ambient conditions are:
- Wetness or high air humidity
- Dust and ammable gases, vapours or solvents
- Hot light sources
- Strong vibrations
- Strong magnetic elds as present near machines and speakers.
Any other use than that described above will damage the product.
No part of this product must be modied or converted!
Always observe the safety information!
All company names and product names are trademarks of their respective owners. All rights reserved.