Operation Manual

Package Contents

Multimeter with built-in spare fuse

Safety measuring leads red and black

1 mignon battery

Operating Instructions

Explanation of symbols and signs

Overload, the measuring range was exceeded

Symbol for the acoustic continuity tester

Symbol for the integrated fuse

OFF Switch position OFF

COM/- Measurement reference potential, - for DC

+ Measurement measurement potential, + for DC

AC Wave parameter for voltage

DC Direct magnitude for voltage and current

V Volt (unit of electric voltage)

mA Milliampere (unit of electric current, exp.-3)

Ω Ohm (unit of electrical resistance)

x1K The resistance value read has to be

multiplied by 1,000

dB Attenuation in the AC voltage measurement circuit

(0 dB = 1 mW/600 Ohm = 0.775 V)

BAT Battery test

REPLACE/BAD The battery must be replaced

? The battery should be replaced as soon as possible

GOOD The battery may be used