Data Sheet

VOLTCRAFT
®
- TOP PERFORMANCE IN EVERY WAY
“
Since 1982, our product range has been dynamically adapting to the constant changes in the industry. W
e commit to
offering first-class quality to our customers while delivering an excellent cost-performance ratio. This philosophy remains
the cornerstone of Voltcraft’s success.”
VC-519
CLAMP MULTIMETER
VERSION 12/21
Nº 1386328
Compact AC current clamp with multimeter functions. The clamp multimeter enables non-contact AC current measure-
ments without interrupting the circuit. A built-in torch allows measuring point illumination in low light conditions. Despite
its small size, a good one-handed operation is possible even when wearing protective gloves.
FEATURES:
CAT III 600 V // Integrated LED torch //
EQUIPMENT:
Measuring functions: DC/AC current // alternating current
// resistance // temperature // diode test // audible continuity
tester // automatic shutdown // battery change indicator //
non-contact AC voltage detection // automatic/manual range
selection // selectable display backlight // hold function //
TECHNICAL DATA:
Display: 2000 counts
Measuring type: arithmetic mean
Voltage measurement: AC/DC
Measuring range V/DC: 0.1 mV - 600 V
Measuring range V/AC: 0.1 mV - 600 V
Basic accuracy: ±1.5 %
Frequency range: 50 - 60 Hz
DC/AC internal resistance: 10 MΩ
Current measurement: AC
Measurement range A/AC: 0.01 - 400 A
Measurement range resistance: 0.1 Ω - 20 MΩ
Measurement range temperature: -20 to +760 °C
Opening range for current clamp: 30 mm
Measurement category: CAT III 600 V
Power supply: 2x 1.5 V micro batteries (AAA, LR3)
Automatic shut-down: aer ca. 15 minutes, cannot be
deactivated
Product dimensions (L x W x H): 200 x 70 x 38 mm
Weight: 230 g
Legal notice
This data sheet is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This data sheet represent the technical status at the time of printing.
© Copyright 2022 by Conrad Electro
nic SE
1386328_V2_1221_01_PIX_ds
G
PACKAGE CONTENTS:
Digital clamp multimeter // 2 x safety test leads with remo-
vable CAT III covers // Plug adapter thermocouple – banana
plug // Wire temperature probe (-40 to +230 °C, type K
thermocouple plug) // 2 x AAA batteries // Bag // Operating
instructions //