Instructions

Quick Guide
2
Rear Panel
3
9 8 7
11
10
1
2
6
4
5
1. Handle
2. Air vents
3. Input terminals of optional multimeter
4. AC power input jack
5. Fuse
6. Foot stool: Adjust the tilt angle of the oscilloscope.
7. LAN port: the network port which can be used to connect with PC.
8. USB Device port: It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "slave device". For example: to use this port when
connect PC to the oscilloscope by USB.
9. Lock Hole: You can lock the oscilloscope to a fixed location using the security lock
(please buy it yourself) to secure the oscilloscope.
10. Trig Out(P/F) port: Trigger signal output or Pass/Fail output, also can be used as the
port of CH2 Output of optional dual-channel waveform generator. The output type can
be set on the menu (Utility menu→Output→Output).
11. Out 1 port: CH1 Output of optional dual-channel waveform generator.