User manual

• Do not switch the meter on immediately after it was taken from a cold to a

warm environment. The condensation that forms might destroy your device.

Let the device reach room temperature before switching it on.

• When measuring highly reective surfaces, observe that these may be hot-

ter than indicated in the measurement.

• Do not leave packaging material unattended. It may become a dangerous

toy for children.

• If there are any questions that are not answered in this operating manual,

contact our technical support or another expert.

• Also observe the safety information in each chapter of these instructions.

• The mains unit is constructed pursuant to protection class II.

• The mains socket for the mains unit must be close to the device and easily

accessible.

•

The mains unit is only suitable for dry, closed rooms. Do not expose it to

direct sunlight, heat, cold, dampness or wetness; otherwise, it will be dam-

aged.

• Moreover, there is a risk of a fatal electric shock!

• Do not pull the mains unit from the mains socket by pulling the cable.

• If the mains unit is damaged, do not touch it. Danger to life from electric

shock!

• First deactivate all sides of the mains socket to which the mains unit is con-

nected (e.g. switch off the respective fuse or turn out the fuse. Then deacti-

vate the associated FI protection switch). Only then pull the mains unit from

the mains socket and take the product to a specialist workshop.