Instructions

4.Quick Start
7
①
Power socket
AC input connector
②
Fuse
The rating is
220 - 240 VAC
250 V, F0.5AL
③
USB (type B)
connector
This can be used to connect a USB type B controller.
Connect with an external device, such as connected to a PC
and controlled via PC software.
④
Ext Mod In
Connector
External modulation input, use it as external signal source.
⑤
Ext Trig/Burst/Fsk
In connector
This signal can be used as external signal source in Sweep,
Burst and FSK mode.
⑥
Ref Clk/Counter In
connector
To accept an external clock signal
, or to accept the input
signal of counter. (See page 39, To Set the Counter)
⑦
Ref Clk Out
connector
To synchronize generators. Output a clock signal generated
by the crystal inside the generator. (See page 39, To Set the
Clock Source)
User Interface
④
⑨
⑧
③
⑦
②
①
⑥
⑤
⑩
⑪
Figure 4-3 User interface (take Sine for instance)
①
Current channel
②
Parameter 1, display parameter and edit the focused parameter
③
Current signal type or mode
④
The setting menu of current signal or mode
⑤
Parameter 3, display parameter and edit the focused parameter