Instructions

5.Front Panel Operation
38
FSK Rate 100 Hz
ASK Rate 100 Hz
PSK Rate 100 Hz
Source Internal
Sweep Default
Start/Stop Frequency 100 Hz/1 kHz
Time 1 sec
Mode Linear
Burst Default
Frequency 1 kHz
Count 1 Cycle
Period 1 sec
Phase 0°
Others Default
Brightness
100%
Separator Comma
Screen Saver time 30 minutes
Load High Z
Phase Deviation 0°
Clock Source Internal
Channel Output Control Off
To Set the Beep
(1) Press Utility and choose System, enter the second page of the menu.
(2) Press F1 to select Beep.
(3) Press F1 to switch between On/Off. On is to activate the sound when the system
informs you. Off is to deactivate it.
View System Information
(1) Press Utility and choose System, enter the second page of the menu.
(2) Press F2 to select Sys info. You can view the Version and Serial number.