Instructions

9.Technical Specifications
46
Voltage Range and Sensitivity (non-modulation signal)
DC coupled
DC offset range
±1.5 VDC
100 mHz - 100 MHz
250 mV
p-p
- 5 V
p-p
(AC+DC)
100 MHz - 200 MHz
450 mV
p-p
- 3 V
p-p
(AC+DC)
AC coupled
1 Hz - 100 MHz
250 mV
p-p
- 5 V
p-p
100 MHz - 200 MHz
450 mV
p-p
- 4 V
p-p
Pulse width and
Duty cycle
Measure
1 Hz - 10 MHz (250 m V
p-p
- 5 V
p-p
)
Input adjust
Input impedance
1 MΩ (DC Coupling)
High Z (AC Coupling)
Coupling mode
AC, DC
High frequency restrain
High frequency noise restrain (HFR)
On or Off
sensitivity
Low, Middle, High
Trigger level range
±
2.5 V
Input/Output
Channel Coupling, Channel Copy
Phase Deviation
0 - 360°
Rear Panel
Interfaces
USB (type B) connector
External Modulation Input
Input Frequency Range
DC-20 kHz
Input Voltage Range
± 5 Vpk
Input Impedance
10 kΩ (typical)
External Trigger Input
Level
TTL-compatible
Slope
Rising or falling (selectable)
Pulse Width
>100 ns
Trigger Delay
0.0 ns - 60 s
External Reference Clock Input
Impedance
1 kΩ, AC coupled
Requested Input voltage swing
100 mV
p-p
to 5 V
p-p
Locking range
10 MHz ± 9 kHz
Counter Input (share the same port as External Reference Clock Input)
DC coupled
DC offset range
±1.5 VDC
100 mHz - 100 MHz
250 mV
p-p
- 5 V
p-p
100 MHz - 200 MHz
450 mV
p-p
- 3 V
p-p
AC coupled
1 Hz - 100 MHz
250 mV
p-p
- 5 V
p-p
100 MHz - 200 MHz
450 mV
p-p
- 4 V
p-p
External Reference Clock Output
Impedance
50 kΩ, AC coupled
Amplitude
3.3 V
p-p
, access 1 MΩ