Safety data sheet

ManualsBrandsVOLTCRAFT ManualsFlow GaugesDO-410 DO meter O2 staturation Calibrated to Manufacturer's standards (with certificate)

Safety Data Sheet (SDS) according to Regulation (EC) No 1907/2006

( Amended by Regulation ( EU ) no. 453/2010 )

Print date:

21.12.2016

Version:

Replaces Version:

03.08.2016

Trade name:

KOH

Manufacturer:

GHM Messtechnik GmbH – Standort

GREISINGER

Seite : 5 / 9

Exposure controls/personal protection

8.1

Control parameters

8.1.1

Occupational exposure limits:

not applicable

8.2

Exposure controls

8.2.1

Appropriate engineering controls:

see Section 7

8.2.2

Personal protective equipment:

General safety and hygienic measures:

Do not eat, drink or smoke at work.

Keep away from food.

Take off dirty, soaked clothes immediately.

Wash hands before breaks and at end of work. Avoid contact with eyes and skin.

Eye / Face protection:

Tightly sealed goggles

Skin protection:

Gloves

For full and splash contact:

Glove material: nitrile rubber

Thickness (mm): Thickness 0,11mm

Penetration time (min.):> 480 minutes of

Other skin protection

Body protection must be chosen depending on risk concentration and amounts of specific workplaces. The

resistance of the protective equipment should be inquired at the respective supplier.

Change contaminated clothing. Preventive skin protection recommended. After finishing work

wash and face.

Breathing protection:

required when vapors / aerosols

Heat / cold protection:

not applicable

8.2.3

Environmental exposure controls:

not applicable