Specifications

General Safety Precautions and Installation Tips:

• Place the inverter on a reasonably flat surface, either horizontally or vertically.

• The inverter should not be installed in the engine compartment, due to possible water/oil/acid

contamination, and excessive heat under the bonnet, as well as potential danger from petrol

fumes and the spark that an inverter can occasionally produce. It's best to run battery cables

to a dry, cool mounting location.

• Keep the inverter dry. Do not expose it to rain or moisture. DO NOT operate the inverter if

you, the inverter, the device being operated, or any other surfaces that may come in contact

with any power source are wet. Water and many other liquids can conduct electricity which

may lead to serious injury or death.

• Avoid placing the inverter on or near heating vents, radiators or other sources of heat. Do not

place the inverter in direct sunlight. Ideal operating temperature is between 10° and 30°C.

• In order to properly disperse heat generated while the inverter is in operation, keep it well

ventilated. While in use, maintain several inches of clearance around the top and sides of the

inverter.

• DO NOT use the inverter near flammable materials.

• DO NOT install inverters in unvented battery compartments.

Errors and omissions excepted.