Operator`s manual

Maneuvering
Shifting between forward and reverse should be done
at idling. Shifting at higher engine speeds can be
uncomfortable for passengers and cause unnecessary
stress on the stern drive/reverse gear, or cause the
engine to stop.
If you attempt to shift gear at an excessive engine
speed, a safety function cuts in automatically, and
delays shifting until engine speed has fallen to 1000
rpm.
Always do a forwards/reverse operation
as follows:
1 Reduce engine speed to idle and let the boat more
or less lose way.
WARNING!
Never shift to reverse when the boat is planing.
2 Move the control lever to neutral with a rapid, dis-
tinct movement. Make a brief pause.
3 Then move the control lever to reverse with a rapid,
distinct movement and increase engine speed.
IMPORTANT!
It is important all engines are running during reversing
maneuvers to avoid the risk of water entry via the
exhaust pipe into the stationary engine.
1
2
3
P0005856
Operation
7748887 04-2008 33