Operator`s manual

Emergency Shifting
If a fault occurs which prevents gear shifting with the
control levers, it is possible to shift manually using the
description below.
NOTICE! The following procedure can be performed
with the engine(s) shut down or running.
WARNING!
In emergency shifting, the unit is locked in forwards
operation and the revers gear can not be disengaged
with the control lever. Forward motion can only be cut
off by stopping the engine with the ignition key or stop
button.
NOTICE! The marking “P” (Primary) is for forward gear
and the marking “S” (Secondary) is for reverse gear.
In Case of Emergency
7748921 04-2008 59