Technical data

26
Reverse Gear
Oil quality/Viscosity See under “Engine”
Oil capacity, litre (qt.) 0.55 (0.5)
Cooling System
Thermostat, starts to open at °C (°F) 60°±2 (140±2)
fully open at °C (°F) 90° (195)
Fuel System
Fuel injection pump, make & type Bosch PFR1K
Feed pressure, MPa (kp/cm
2
= lbf/in
2
) 7.5 (0.75 = 11)
Injector, make Bosch, holder KBAL 65
nozzle DLLA 150
opening pressure, MPa (kp/cm
2
= lbf/in
2
) 1800 (180 = 2560)
Pre-injection angle, crankshaft degrees B.T.D.C. 25 - 28°
Fuel quality “Autodiesel” Cet. rating minimum 45
Electrical System
Battery voltage 12v
Battery capacity, standard 60 Ah
max 120 Ah
Starter motor 0.8 kW (1.1 h.p.)
Alternator 35A (420W)
Battery, electrolyte specific gravity:
Charging carried out at g/cm
3
1.230
Fully charged battery, g/cm
3
1.275 - 1.285
Tightening Torques
Cylinder head nuts, Nm (kpm = lb.ftf) 70 (7.0 = 50)
Connecting rod bolts, Nm (kpm = lb.ftf) 70 (7.0 = 50)
Crankshaft main bearings, Nm (kpm = lb.ftf) 70 (7.0 = 50)
Flywheel nut, Nm (kpm = lb.ftf) 500 (50.0 = 362)
Injector nuts, Nm (kpm = lb.ftf) 10 (1.0 = 7)
TECHNICAL DATA