Instruction manual

41
TAMD60 AQD70, TAMD70
Borg Warner, model .................................................................... 73 CR V-drive 10-05
Ratios............................................................................................ 2:1, 3:1 1.5:1, 2:1
Oil quality ...................................................................................... Same as in engine
(viscosity, however SAE 30)
Oil capacity (including cooler) .................. dm
3
(Imp.gall,US gall.) 2.5 (0.6-0.7) 5.5 (1.2-1.5)
Oil pressure, normal during running ..............MPa (kp/cm
2
, p.s.i.) 0.85-1 0.77-1.05
(8.5-10, 120-140) (7.7-10.5, 110-150)
Weight ................................................................................. kg (lb) 85 (187) 120 (265)
Clutch – Reduction gear
Permitted engine speed with engaged power
take-off ........................................................................... r/s (r/min) 15.0-30.0 (900-1800)
Twin Disc
Reduction ..................................................................................... 3.6:1
Size ................................................................................... mm (in) 203 (8")
Weight, approx ................................................................... kg (lb) 75 (165)
Oil quality and viscosity ................................................................ Engine oil SAE 40 alt Hypoid
oil SAE 80
Oil capacity .................................................. dm
3
(Imp.qts, USqts) 1 (0.9-1.1)
Borg Warner/Rockford
Reduction ..................................................................................... 1:1; 2.8:1
Size (1.1; 2.8:1) ................................................................. mm (in) 203 (8") alt 254 (10")
Weight, approx (1:1) ........................................................... kg (lb) 65 (143)
(2.8:1).................................................................................. kg (lb) 75 (165)
Oil quality and viscosity (red. gear) ................. Engine oil SAE 30
Oil capacity, approx (red. gear 8") ................ dm
3
(imp.qts,USqts) 1 (0.9-1.1)
(red. gear 10") ............................................... dm
3
(imp.qts,USqts) 1.5 (1.3-1.6)