Owner`s manual

151
Maintenance and service
Location of bulbs in rear lamp
cluster
Bulbs in rear lamp cluster
1. Switch off all lights and turn ignition key to
position 0.
2. Lower the bottom of the tailgate and open
the floor hatch.
3. If the car is equipped with a grocery bag
holder (option), loosen the holder’s
retaining straps.
4. Remove the corner piece (A).
5. Open the hatch (B) in the side panel by
pulling the catch (C) up and towards you.
6. Take spanner no. 10 out of the tool kit.
7. Loosen the nuts (D).
8. Pull the entire insert straight back.
9. Loosen the extra length of cable for better
accessibility.
10. Place the insert on a soft surface so as not
to scratch the glass.
11. Turn the bulb holder anticlockwise and pull
it out.
12. Turn the bulb anticlockwise to loosen it.
13. Replace the bulb.
14. Refit the bulb holder in the recess and turn
clockwise.
15. Press back the extra length of cable.
16. Refit the insert against the bolt holes. Press
the insert into place.
17. Tighten the nuts.
18. Refit the side panel and corner piece.
1. Direction indicator PY 21 W (orange)
2. Brake light 21 W BA 15
3. Reversing lamp 21 W BA 15
4. Position lamp P21/4W
3
1
2
4
A
B
C
D
D