Owner`s manual

83
Interior
Protective steel grille (option)
The protective grille in the cargo compartment
prevents cargo or pets from being thrown
forward in the passenger compartment in the
event of heavy braking.
For reasons of safety, the protective grille must
always be mounted and secured correctly.
Fit the protective grille as follows:
1. Lift in the protective grille through the
tailgate opening or one of the rear
doorways (fold down the seats in the
second row if necessary).
2. Insert one of the protective grille
mountings in its bracket above the rear
door behind the second row of seats.
3. Slide the protective grille mounting to the
front position of the bracket.
4. Place the other protective grille mounting
in its bracket above the other rear door and
slide it to the front position.
5. Insert the attaching brace through the lower
mounting in the protective grille from
underneath, as indicated in the illustration.
6. Fit the spring on the attaching brace and
screw in the knob.
7. Fit the attaching brace hook in the load
anchorage
and tighten the knob until the attaching
brace takes hold in the load anchorage.
8. Do the same on the other side.
9. Tighten both attaching braces alternately.
10. Fit protective caps on the exposed screw
threads above the knobs.
WARNING!
For cars seating seven: For reasons of safety,
no passengers should sit in the third row of
seats if the protective grille is positioned
behind the second row of seats.