User manual

02 Get to know your navigation system
DVD disc, screen
02
28
3.
The screen shows
New software
found - start the update by pressing OK.
(Cancel by pressing EXIT).
4.
The screen shows
Please enter licence
code: - input the licence code using the
numeric keypad, see page 19.
5. Follow the instructions on screen, which
continuously show the progress of the
update and the approximate time remain-
ing.
•
The update has to be enabled once all
DVDs have been loaded. This is done by
switching off the engine and waiting
5 minutes before restarting. The update is
then complete and the navigation system
can be used again.
NOTE
In certain cases updating map data may
also add new functions in the system,
which are not described in this manual.
Continue an interrupted update
If the update is not complete when the engine
is switched off, the process continues from
where it left off the next time you start the
engine. Proceed as follows to restart an inter-
rupted update:
•
If the disc is inserted into the DVD player:
Start the engine - the update is resumed
automatically. Follow the instructions on
screen.
•
If the disc is removed: Start the engine
and insert the disc into the DVD player -
the update is resumed automatically. Fol-
low the instructions on screen.
Care of DVD discs
Handle DVD discs with care.
When they are not in use they must be stored
in their packaging. Avoid storing them in
damp, high temperature, direct sunlight or
dusty surroundings.
Screen care
Clean the screen with a soft, lint-free rag,
lightly moistened with a mild window cleaning
agent.
IMPORTANT
Do not place any objects in front of the
GPS navigator's display screen - the sur-
face could then be scratched. Mobile
phones can also interfere with the display
screen's function.