Installation Guide

Pairing module
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated
1. Turn Ignition and radio “ON”
Blue LED in adapter peephole will flash (pairing mode)
2. On A2DP device: go to Settings, Wireless & Networks, Bluetooth
Settings
3. Select Bluetooth and turn on, select Bluetooth settings
4. Tap
Scan for devices .
5. Wait for Bluetooth device name (See below) to appear and select it. Once
paired Blue LED inside peephole flashes once every 2 seconds and
confirmation tone is heard on car speakers
One connection
The A2DIY-VOL connects to one device at a time. You must disconnect/unpair first
device before pairing a second, or simply disable Bluetooth on first device.
Notes:
1.
New! On incoming calls, ring tone and call number announced on car speaker.
Additional tone (static) heard during call number announcement (this is normal)
2. *Media remote does not control Volvo radio functions.
Media remote button
Pairing Bluetooth remote button: Ensure Bluetooth is enabled on your
device (e.g., Smartphone/Tablet etc.)
Press and hold pause/play button (See Fig. 18) until Blue LED flashes
Scan smartphone for available devices and select BT009 from list. (Blue LED turns
off).
Fig. 18
Installation:
Attach button to steering wheel (includes holder) or dashboard using included
double sided tape – your choice!