Owner`s manual

03 Planning your trip
Settings
03
54
Adjust the map scale in dual map mode
To view both maps with different map scales,
they can be adjusted individually as follows:
1. Start from map view mode. Turn the
TUNE knob to the left and right - one
screen half is surrounded by a colour
frame.
2.
Press OK - selected screen half is now
"active".
3.
Turn the TUNE knob to adjust the scale.
4.
Press OK again - done, the screen half is
"deactivated".
Left map settings
Left map settings
•
Map orientation - Select Heading or
North.
•
Map view - Select 2D or 3D.
Right map settings
Right map settings
Same as for left map - see previous section.
Show full-screen map
Cursor on Show full-screen map + OK ticks
the function that shows the map image across
the whole of the display screen. This removes
the information fields in the bottom and top of
the screen with information on e.g. passenger
compartment temperature.
Facility on map
POI on map
Tick the desired option for how many facilities
are to be shown on the map:
•
All - all facilities appear.
•
None - no facilities appear.
•
Selected - A menu with all facilities
appears: Tick the facilities that you want to
appear on the map.
NOTE
If a POI category with many symbols on the
map is deselected/switched off, more POIs
from other categories can be shown/viewed
on the screen.
Possible facilities are listed on page 70.
Compass
Compass
Select the type of compass you want to appear
on the map image:
•
Graphic
•
Text - compass direction (upwards on the
display screen) is indicated by a letter, e.g.
N for "North".
•
None.
See more information about the compass on
page 31.
Show current road name
Cursor on Show current road name + OK
ticks the function that shows the name of the
street/road where car is located in the lower
edge of the display screen.
Show speed limits