Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 29(41)
Assembly
6
T2006782
Fig. 32: Installing the valve locks
Coat the valve stems with clean engine oil. Place the
valves in the valve guides. Position tool 9998335 on the
valve stem and push the seal over the tool until the seal
bottoms out against the valve guide. Install the springs
with regard to whether they are intake or exhaust valve
springs. Carefully press down the springs and install
the valve locks.
Note: Exhaust valves have double springs.
7
Install the valve bridges in their respective positions and
adjust. See Service Information, Group 23, Valve and
Electronic Unit Injector Adjusting.