Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 36(41)
2143-03-05-03
Valve Guides, Replacement (One Cylinder Head)
You must read and understand the precautions and
guidelines in Service Information, group 21, "General
Safety Practices" before performing this procedure.
If you are not properly trained and certified in this
procedure, ask your supervisor for training before
you perform it.
Special tools: 9996159, 9996161, 9998260,
9998261, 9998262, 9998263, 9996222
Removing
1
T2007152
Pressing tool 9998260 installed
Install pressing tool 9998260 in the holes for the cylinder
head attachment bolts.
Note: Place washers between the nuts and the bottom
surface of the cylinder head.
CAUTION
Wear eye protection whenever using press.
2
Tighten the tool nuts.
3
Install hydraulic cylinder 9996159 in tool 9998260.
Press out the valve guide. Repeat steps to remove
other valve guides.
Note: Tool 9998261 may have to be used between
9998263 and 9996159 if the cylinder stroke is not
long enough.
Installing
1
Coat the outside of the valve guides with engine oil before
pressing them into place.