G930 VOLVO MOTOR GRADERS 2007.05 MORE CARE. BUILT IN. 036-454 Q4 930 web specs R2.
SPECIFICATIONS G930 Base operating weight - approximate Weights shown include full cab with ROPS, all operating fluids, operator and standard equipment.
G930 3 Range engine power control Low range power Rated net brake horsepower @ 2100 RPM§ Torque hp (kW) 155 (115) lb.ft (N.m) 668 (906) @1200 Mid range power Rated net brake horsepower @ 2100 RPM§ Torque hp (kW) 175 (130) lb.ft (N.m) 675 (915) @1400 High range power Rated net brake horsepower @ 2100 RPM§ hp (kW) 195 (145) Maximum net horsepower @ 1800 RPM hp (kW) 204 (154) lb.ft (N.m) 684 (928) @1550 Torque No engine derating required up to 9,800 ft (3 000 m) altitude.
G930 Tandems Depth in (mm) 8.9 (226,5) Height in (mm) 24.25 (616) Thickness inner wall in (mm) 1 (25) outer wall in (mm) .78 (20) Center distance in (mm) 61 (1 550) in (mm) 2 (51) degrees ± 15º Drive chain pitch Oscillation Differential / Final drive Model Volvo APR70 Planetary final reduction with an operator controlled wet multiple disc lock/unlock differential.
G930 Frame Front Minimum dimensions of box section in (mm) Plate thickness in (mm) Vertical section modulus at arch 10.5 x 13.5 (265 x 340) .79 (20) 3 cu in (cm ) 119 (1 950) minimum cu in (cm3) 101 (1 663) maximum cu in (cm3) 212 (3 474) Minimum dimensions in (mm) 10 x 4 (254 x 100) Plate thickness in (mm) .38 (9,6) Rear Optional first user lifetime warranty on frame, includes maintenance free articulation pins and bearings. Moldboard Standard moldboard with replaceable end bits in .
G930 Circle Pitch diameter in (mm) 64 (1 626) Thickness in (mm) 1.25 (32) Adjustable guide shoes - standard / optional 3/5 Adjustable clamp plates - standard / optional 3/5 Upper circle wear plates - standard / optional 3/5 Circle to drawbar support is provided by Duramide™ wear plates and bearings at the clamp and guide shoes. Duramide™ prevents metal-to-metal contact and provides maximum service life.
G930 Capacities Fuel tank U.S. Gal. (l) 92 (348) Transmission U.S. Gal. (l) 16 (61) Final drive U.S. Gal. (l) 3.5 (13,2) Tandems (each) U.S. Gal. (l) 26.4 (100) Hydraulic oil tank U.S. Gal. (l) 24 (91) Coolant antifreeze protection to -58º F (-50º C) approx U.S. Gal. (l) 8.2 (31) Engine oil U.S. Gal. (l) 5.
STANDARD FEATURES / OPTIONAL EQUIPMENT Model (S - Standard / O - Optional) G930 G940 G946 G960 G970 G976 G990 Powertrain Volvo engines meets off-road Tier 3 / Stage IIIA emission criteria - 3 power curves S S S S S S S Rear axle, operator controlled, lock/unlock differential with planetary final reduction S S S S S S S 4 wheel wet disc braking system with crossover dual circuits and reserve power assist S S S S S S S Spring applied wet multiple disc park brake with operator w
Model (S - Standard / O - Optional) G930 G940 G946 G960 G970 G976 G990 Proportional Demand Flow hydraulic system with short throw, low effort control levers S S S S S S S 10 section hydraulic control valve - includes two spare sections with levers S S S S S S S Circle turn relief located integral with main manifold S S S S S S S Hydraulics Hydraulic oil level monitor via Contronics S S S S S S S Blade Lift Float Control, independent right and left detent style O O
Volvo Construction Equipment is different. It’s designed, built and supported in a different way. That difference comes from an engineering heritage of over 170 years. A heritage of thinking first about the people who actually use the machines. About how to help them be safer, more comfortable, more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network dedicated to helping you do more.
