Owner`s manual

04 Traffic information
Reading information
04
``
63
•
expected duration
•
limitations (speed, vehicle width/height,
etc.)
•
roads affected
If there is more than one traffic disruption within
the box, press OK to display information about
the problem closest to the center of the cross-
hairs first.
Numbers, such as "
2/5" at the top of the
screen, indicate that the currently displayed
traffic message is number 2 of a total of 5 in the
box. Display the other messages by pressing
OK.
•
Return to the map screen by pressing
EXIT.
Avoiding traffic disruptions
Traffic events ahead
Menu row 2 when no itinerary has been set
With Traffic events ahead selected, press
OK to list the current traffic disruptions.
Traffic events along route
Menu row 2 with a set itinerary
This is the same menu row as in the previous
section, but with a set itinerary. The text then
changes from
Traffic events ahead to Traffic
events along route
. You can opt to have the
system guide you around the traffic disruption
on another route.
Press OK to list the traffic disruptions along the
route.
A list with one disruption along the itinerary's route
The driver can avoid traffic disruptions by let-
ting the system choose another route. To do
so:
1. Select the traffic disruption to be avoided
and press OK to mark the selection.
2. A number of areas can be marked to be
avoided. Up to 15 areas with traffic disrup-
tions can be selected.
3.
Continue by marking
Calculate new
route
+ OK.
The system will then calculate a new route to
avoid the traffic disruption.
To get detailed information about a listed traffic
disruption:
•
Select one from the list and press # INFO
(on the center console control panel) to
display the information.