Technical data

13
Special tools
884978 884982 885008
885009 885043 885127 885143 885146
885148 885153
885197 885207 885208
884975-4
1)
Installation tool
884976-2
1 )
Protection sleeve
884978-8 Trim cylinder removal tool, intermediate
884982-0 Disassembly tool for outer bearing race.
Intermediate housing, extension.
885008-3 Allen wrench, upper, intermediate & lower
gears
885009-1 Cap wrench
885043-0 Torx 50 bit – Input gear
885127-1 Installation/dismantling tool – propellers
885143-8 Yoke, holding the sterndrive while install-
ing the clamps for the bellows. Models
290, SP, DP
885146-1
2)
Suspension tool
885148-7 Pin remover, intermediate
885149-5 Drilling jigg, duoprop, lower
885152-9 Kit containing tools 884387 and 885153
885153-7 Spacer ring, mounting plate, upper
885192-5 Suspension fixture
885197-4 Tool, duoprop, threaded screw, lower
885207-1
3)
Hook spanner, power steering cylinder
885208-9
3)
Hook spanner, power steering cylinder
885209-7
3)
Sleeve, power steering cylinder
885226-1 Drift, bearing remover, lower
885227-9 Spacer ring
885227
885192
3)
These special tools have been designed for the overhaul of the
power steering cylinder. The overhaul procedure is described in
the Installation instruction , publ. no. 7734865-4, included in
the overhaul kit part no. 872697-8. The tool can be ordered on the
usual parts form.
884975 884976
1)
Included in kit no. 884977
2)
Earlier part no. 884862
885209 885226
885149