Technical data

33
Repair instructions
16. Remove the locking ring (1) and the sealing (2).
NOTE! Always replace the sealing!
17. Press out the input gear. Use special tools 884386
and 884259.
13. Press out the bearings of the bearing sleeves.
Use special tools 884386 and 884265.
14. Remove the Allen-head screw (1) and the collar
washer (2) in the center of the universal joint shaft.
Pull out the universal joint and push out the double
bearing box (3) from the clamping ring (4). Use a
rubber mallet if necessary.
NOTE! Do not damage or lose the shims!
15. Remove the collar washer (1) from the double
bearing box.
NOTE! Take care of the shims (2).
Input gear (Double bearing box)
884386
884265
884259
884386