Technical data

49
Repair instructions
14. Press out the input gear. Use special tools 884938
and 884266. Remove the crush sleeve and discard.
15. Turn over the double bearing box and press out
the seal ring along with the roller bearing. Use special
tool 884263.
NOTE! The bearing will be damaged if removed, only
remove if a new bearing will be installed.
16. Use a “knife puller” to remove the roller bearing
from the gear (if necessary). Also use special tool
884266.
13. Use special tool 3850608 to remove the locking
ring (1), remove the shoulder washer (2).
NOTE! The seal ring (3) can be removed at a later
time.
1
2
3
3850608
884938
884266
884266
884263