Technical data

Repair instructions

Intermediate housing

Reconditioning the

intermediate housing, model

280 and 285

1. Remove the 2 screws holding the hose connection

(1) on the yoke. Remove the hose connection and

the gasket.

2. Dismantle the yoke by driving out the steering spin-

dle. Use special tools 884311 and 9991801. Then re-

move the retaining pawl from the yoke.

3. Remove the plastic washers (1) and the wear wash-

er (2).

4. Press out the sealing rings and the needle bearing.

Use special tool 884259 and 9991801.

NOTE! There is a sealing ring on each side of the

needle bearing.

884311

9991801

884259

9991801