Technical data

Repair instructions

9. Knock out the 2 sealing rings (1) off the propeller

bearing housing.

10. Fold down the tab on the locking washer (1) and

remove the nut holding the pinion to the vertical drive

shaft.

The vertical shaft

11a. Models 280 and 290 of earlier manufacture

and model SP: Fold down the tab of the locking

washer (1) and remove the round nut (2). Remove the

locking washer and the spacer ring (3).

11b. Models 280, 290 of later manufacture: Lift the

gear housing off the special tool and place it back in

the work stand. Remove the nylock® nut with a hook

spanner wrench.

12. Use special tools 884267 and 884830 to remove

the pinion.

884267

884830