Operator`s manual

INSTRUMENTS AND CONTROLS
110
DASH SWITCHES
Power Take-Off (PTO)
There are two basic types of PTOs available: engine-mounted and
transmission-mounted.
The transmission-mounted PTO is clutch dependent, which means
that operation can be regulated by depressing or releasing the clutch
pedal. This PTO should NOT be in use while driving.
The engine-mounted PTO is direct-mounted to the engine and is
engaged with a bypass valve operated by the switch. This PTO can be
in use while driving.
It is important to only engage the switch when the PTO
is required. Leaving the PTO pump engaged when not
needed can lead to poor performance and pump
damage.
Transmission-Mounted PTO
The transmission-mounted PTO is clutch dependent, which means that
operation can be regulated by depressing or releasing the clutch pedal.
This PTO should NOT be in use while driving.
Engage the PTO by depressing the clutch pedal and pressing in the
bottom part of the switch. Release the clutch pedal to start the PTO.
One or two PTOs can be run at the same time. Applications change
depending on customer needs and components.
vn-vhd.bk Page 110 Tuesday, July 1, 2008 9:44 AM