Operator`s manual

INSTRUMENTS AND CONTROLS
112
PTO Speed Adjustment
Engage the PTO before adjusting the speed. For the PTO speed
adjustment to function, the Cruise Control or idle adjust cannot be
active, brake and clutch pedals must be released, and vehicle speed
must be under approximately 8 km/h (5 mph).
To set engine speed:
1. Set the PTO/CC switch in the ON position.
2. Depending on configuration, the engine speed may automatically
be selected when the PTO dash switch is activated (Volvo engines
only).
3. If NOT, then
a. Volvo engines: Press the RESUME button to achieve the
preset PTO engine speed. Alternatively, the accelerator
pedal can be used to achieve the desired engine speed, and
press SET+ or SET− to hold that speed
b. Cummins engines: Press either the RESUME, SET+, or
the RESUME and SET+ buttons simultaneously to achieve
one of three possible preset speeds.
vn-vhd.bk Page 112 Tuesday, July 1, 2008 9:44 AM