Operator`s manual

INSTRUMENTS AND CONTROLS
136
Setting Display Time/Clock
Press MENU/SNOOZE to toggle between TIME
DISPLAY, ALARM, HEAT and TIMER menus until
desired icon is displayed.
Press the SET button. The SET indicator comes on. Choose 24 hr or
12 hr format by pressing either the + or − buttons. Press SET again.
The hour digits are flashing. Set the time to the desired hour by
pressing + or − buttons. Press SET.
The minute digits are flashing. Set time to the desired minute by
pressing + or − buttons. Press SET.
The SET indicator disappears.
The Time is set.
After 7 seconds of inactivity, the Time/Clock setting
returns to the time display screen. Press the SET
button to restart.
vn-vhd.bk Page 136 Tuesday, July 1, 2008 9:44 AM