Operator`s manual

INSTRUMENTS AND CONTROLS
139
CYCL: Set one time to continuously cycle between ON and OFF.
When the selection is complete, for example, select AUTO and press
SET. Current ON or OFF status is displayed. Make desired selection
by pressing ON/OFF button. Press SET.
Hour digits flashing. Press the + or − buttons to select the desired
hour. Press SET, the hour is set.
Minute digits flashing. Press the + or − buttons to select the desired
minutes. Press SET, the minute is set.
The SET indicator at the top left of the display screen disappears. The
HEAT indicator remains at the top left of the display screen.
The Automatic Heater is set.
After 7 seconds of inactivity, the Time/Clock setting
returns to the time display screen. Press the SET
button to restart.
vn-vhd.bk Page 139 Tuesday, July 1, 2008 9:44 AM