Operator`s manual

INSTRUMENTS AND CONTROLS
195
SLEEPER BUNKS
General
Upper and lower bunks are available in the VN 780, 730, 670 and
630 models. The lower bunk is standard while the upper bunk is
optional. The VN 430 and VHD 430 are equipped with one lower bunk.
The bunks for the VN 670, 630, 430 and VHD 430 cover the luggage
compartment. They are hinged for access to luggage from inside of the
cab.
To gain access, release the latch mechanism and lift by the edge of the
bunk platform. Gas springs aid in opening and closing the platform in
some models.
The upper bunks for the VN 780, 670 and 630 may also be hinged
(optional), and can be raised out of the way. The VN 670 and VN 630
use the safety bunk harness latch to hold up the bunk. The VN 780 has
latches on both sides of the wall that hold the bunk in position. To
release the latches, pull the latch strap in the middle of the bunk
underside.
When the bunk is raised and latched, make sure that the latches on
both sides close and hold the bunk properly. For more information on
bunk safety restraints, see “Safety Restraint VN 430, VN 630, VN 670
and VHD 430” on page 264.
vn-vhd.bk Page 195 Tuesday, July 1, 2008 9:44 AM