Operator`s manual

INSTRUMENTS AND CONTROLS
215
Fresh water and waste water tanks must be drained if
the vehicle is not being used and the outside
temperature is below freezing. Also drain the hose
from the pump to the faucet. Failure to drain the
system may result in component damage due to water
forming ice.
To fill the fresh water tank, unscrew the fill hose from the elbow fitting
and remove the fill cap (5) from the tank. The fill hose is connected to a
hose with a garden hose-type fitting. Before turning the water on, turn
the valve handle (6) to close the valve (see lower illustration). When the
end of the fill hose is inserted in the water reservoir, open the valve
slowly to fill. The valve is fully open when the handle is parallel with the
hose.
vn-vhd.bk Page 215 Tuesday, July 1, 2008 9:44 AM