Operator`s manual

OPERATION
262
Fasten the restraint by connecting the buckle with the latch. Make sure
the belts are not twisted. Test the latch connection by pulling on the
belt. If they come apart, reconnect and test again. If the connection
cannot be made, replace the belt before using the bunk for sleeping
during driving.
To loosen the restraint, press the red release button on the latch.
Restraints should be properly stored when not used. Having the
restraint laying loose in the cab can be a source for unintentional
snagging.
vn-vhd.bk Page 262 Tuesday, July 1, 2008 9:44 AM