Operator`s manual

OPERATION
299
When the vehicle is placed in the Immobilizer Mode during the previous
key-off, the driver is only able to start the vehicle after entering the
correct 3-digit code (PIN Code) into the DID using the stalk switch. The
driver will continue to be prompted for the PIN Code until the correct
3-digit code is entered.
If an incorrect password is entered or the driver
attempts to start the engine before the correct
password is entered, the INFO light will illuminate and
a message to check engine will appear. The ignition
key needs to be cycled OFF and ON to eliminate this
message.
vn-vhd.bk Page 299 Tuesday, July 1, 2008 9:44 AM