Operator`s manual

OPERATION
358
Unlocking the Fifth Wheel
Always check out the entire fifth wheel before attempting to couple to a
trailer (ASF fifth wheel is shown).
If not lubricated properly, add grease to the top of the fifth wheel
plate.
Make sure the mounting of the fifth wheel to the frame is tight and
in good condition.
If using a sliding fifth wheel, make sure the slide locking plungers
are in a locked position.
The following instructions are for preparing the fifth wheel for coupling
to a trailer:
Rotate the safety latch toward the rear of the fifth wheel.
vn-vhd.bk Page 358 Tuesday, July 1, 2008 9:44 AM