Operator`s manual

OPERATION
367
Make sure the trailer kingpin is in the jaw slot and that the jaw is closed
behind the pin. The kingpin should not overhang the fifth wheel or be
caught in the grease groove.
To verify that the kingpin is actually in the fifth wheel slot and the jaw is
closed, the pin must be visually inspected from the rear. Use a
flashlight if necessary.
Make sure the trailer bed is resting on the top surface of the fifth wheel
plate, and that there is no visible gap between the fifth wheel and the
trailer bed plate.
vn-vhd.bk Page 367 Tuesday, July 1, 2008 9:44 AM