Operator`s manual

OPERATION
402
The regeneration process can be stopped at any time by turning the
ignition key to OFF, or, scrolling to the Aftertreatment menu in the Drive
Information Display (DID) and selecting “Cancel REGEN”, or by
pressing Enter on the stalk switch.
If regeneration occurs during vehicle operation, idle
speed may increase when the vehicle is stopped at a
traffic light to maintain proper regeneration conditions.
If the DPF Regeneration Required icon is flashing, the diesel
particulate filter is full. Maintain uninterrupted highway speed for an
automatic regeneration or the vehicles should be moved to a safe
location, stopped and the parked regeneration process should be
initiated.
vn-vhd.bk Page 402 Tuesday, July 1, 2008 9:44 AM